|Home||» Products||» Hydraulic Baling Press||» DOUBLE ACTION BALING PRESS AUTO DOOR|
Double action baling press is immensely suitable for small scrap traders requiring 5 tons to 8 tons of lightweight scraps to be processed per shift.
The technical specification of double action baling press Deluxe manual are as follows: the baling size of the machine is 12 x 24 x “V” , whereas the dimension of baling chamber is 24 x 24 x 54. Gear cum Axial Piston Pump type of the Oil drive is used in the machine. It works on the working pressure of 3300 PSI. Power is driven from the electric motor of 30 HP. The weight of the bale ranges between 40 kg to 60 kg in MS whereas 15 kg to 25 kg in All. The oil tank installed inside the machine has the maximum capacity of 600 liters. It bears a front type bale injection. The machine operates has a cycle time of approximately 60 seconds and is hand lever operated. The lining plates, cutting blades, and the starter are provided in the machine whereas; the oil chiller is optional in it. Double action auto door has an automatic door ejection system and is equipped with only four cylinders.
These machines are available in different sizes meant for fulfilling requirements of all kinds. These metal scrap baling presses effectively make bales of stainless steel and other metal scraps. These systems don’t require too much manpower for smooth functioning and are energy efficient. The systems are used for converting ferrous or non-ferrous scrap in all forms. These double action bailing presses are capable of producing various metal structural scraps, dwelling of scraps, and metallic scratch into bales. The front door of the machine is automatic.
|Oil Drive||Gear cum Axial Piston Pump|
|Working Pressure||3300 PSI|
|Electric Motor||30 HP|
|Wt. of the Bale||40 -60 Kgs. in MS|
|15 - 25 Kgs. in All.|
|Cycle Time||60 Sec. (approx.)|
|Oil Tank Capacity||600 Ltrs.|
|Operation||Hand Lever Operated|
|Wt. of the machine||6 Tons (approx.)|
|Machine Dimention||7' x 3' x 18' (H X W X L)|